Determination of % LiBr, density, alkalinity, inhibitor and wear concentration in ppm. Monitors the fluid condition to maximize chiller reliability and performance.

Determination of % LiCl, density, pH, carbonate / bicarbonate and inhibitor concentration in ppm. Monitors the fluid for concentration and corrosion in liquid desiccant systems.

Determination of glycol concentration in %, physical properties, corrosion and degradationproducts in ppm. Monitors fluid condition to enhance equipment performance and improve reliability of the entire heat transfer service

Determination of pH, alkalinity, hardness, dissolved solids in ppm. Monitors water condition and provides corrosion control for cooling towers and evaporate condensers.

Determination and acid number in mg KOH/g moisture and wear metals in ppm. Monitors acid, moisture, wear metals, contamination and additives in oils. Early detection of abmormal wear for air conditioning and refrigeration compressors.

ID exam of foreign solids and sludge found in oil and refrigerant filters. Gives relative amounts of metals found in the filter element. Results in wt %. Detection of the source of component failure.

Determination of acid number in mg KOH/g high boiling residue in Vol %, moisture and chloride / floride in ppm. High acid and moisture increases corrosion and refrigerant breakdown. Ideally for CFC, HCFC and HFC refrigerants.

Contact Carrier RCD

Contact Totaline Fluid Analysis